Case IH service manuals, diagnostic procedures and parts documentation often use different measurement systems depending on the machine, market and source of the specification.
Use this converter to quickly switch between the units most commonly used during tractor and equipment service, including pressure, torque, temperature, length, fluid volume and speed.
Case IH Service Unit Converter
Convert common service and diagnostic units used in tractor and equipment manuals.
For reference only. Always follow the specifications and procedures in the correct service manual for your machine.
For reference only. Always follow the specifications and procedures in the correct service manual for your machine.
For reference only. Always follow the specifications and procedures in the correct service manual for your machine.
For reference only. Always follow the specifications and procedures in the correct service manual for your machine.
For reference only. Always follow the specifications and procedures in the correct service manual for your machine.
For reference only. Always follow the specifications and procedures in the correct service manual for your machine.
Pressure Converter for Hydraulic and Diagnostic Work
Hydraulic pressure specifications may be listed in psi, bar, kPa or MPa.
This is especially common when comparing Case IH service information from different markets or checking hydraulic test values with gauges that use a different unit system.
Use the pressure converter for:
- hydraulic system pressure;
- transmission pressure;
- charge pressure;
- fuel pressure;
- air conditioning pressure;
- sensor and test specifications.
Always compare the converted result with the correct specification for the exact machine model and system being tested.
Torque Converter for Case IH Service
Fastener torque is commonly specified in either lb-ft, in-lb or N·m.
A correct conversion matters when working with engine components, wheels, hydraulic fittings, transmission parts, sensors and other assemblies where incorrect torque can cause leaks, damaged threads or component failure.
The torque converter allows quick conversion between the most common values found in North American and metric service documentation.
Temperature Converter
Case IH diagnostic information may show temperature values in either Fahrenheit or Celsius.
This converter can be useful when checking:
- engine coolant temperature;
- hydraulic oil temperature;
- transmission temperature;
- intake air temperature;
- exhaust temperature;
- DEF and aftertreatment system data.
Temperature values should always be interpreted together with the operating conditions and the relevant fault code or service procedure.
Length Converter
Dimensions and service specifications may be given in inches, feet, millimeters, centimeters or meters.
Use the length converter when working with:
- clearances;
- sensor gaps;
- component dimensions;
- adjustment measurements;
- hose and cable lengths;
- implement setup specifications.
Fluid Volume Converter
Fluid capacities can vary between US and metric documentation.
The volume converter supports liters, milliliters, US gallons, US quarts and US fluid ounces.
It can be used when checking or comparing:
- engine oil capacity;
- hydraulic fluid capacity;
- coolant volume;
- transmission oil capacity;
- DEF capacity;
- service refill quantities.
Speed Converter
Convert between mph, km/h and m/s when checking machine speed, calibration data or service information.
This can be useful for tractors, sprayers, combines and other Case IH machines where operating or calibration speeds are listed in different units.
Why Unit Conversion Matters During Diagnosis
A converted value is only useful if the original specification is correct.
Service manuals, operator manuals, diagnostic screens and third-party references may use different unit systems. Entering or interpreting the wrong unit can make a normal reading appear abnormal or cause a technician to compare a test result against the wrong threshold.
For that reason, unit conversion should be treated as one part of the diagnostic process.
The machine model, controller, system, operating condition and service procedure still need to match the specification being used.
Use These Converters With Fault Code Troubleshooting
These tools are especially useful when a Case IH fault code leads to a physical test.
For example, a diagnostic procedure may require checking hydraulic pressure, measuring sensor clearance, verifying fluid temperature or tightening a component to a specified torque.
Instead of searching for a separate conversion table, the required value can be converted directly on this page.
For fault-specific troubleshooting, use the Case IH fault code lookup to identify the affected controller and system before performing measurements.