What ARM 18070 Means On a Case IH tractor, fault code ARM 18070 is reported by the ARM controller, which relates to the armrest controls. The official description is: EHR 5 lever implausibility error. The note also states that it is not applicable to CCM/APH and that it may indicate incorrect configuration of the ACM….
What ARM 18047 Means On a Case IH tractor, fault code ARM 18047 is logged by the ARM controller, which relates to armrest controls. The official description is: EHR 4 lever position – voltage too low. In practical terms, the armrest control system is seeing a lower-than-expected voltage signal from the EHR 4 lever position…
This guide explains fault code ARM 18045 on a Case IH tractor. The source description for this code is: “EHR 3 lever position – voltage too high.” In practical terms, the ARM controller has detected that the position signal from the EHR 3 lever is higher than the expected range. Because the fault is reported…
Fault code ARM 18040 on a Case IH tractor relates to the ARM controller, which is associated with armrest controls. The official description is: EHR 1 lever position – voltage too low. In practical terms, the tractor is detecting that the position signal from the EHR 1 control lever is lower than expected. This does…
What ARM 1099 Means ARM 1099 is a Case IH tractor fault code from the ARM controller, which relates to armrest controls. The official description for this fault is: Aux remote valve LIMIT SET switch is failed. In practical terms, the armrest control system has detected a problem with the switch used for the auxiliary…
What ARM 119 Means ARM 119 is a Case IH tractor fault code from the ARM controller, which relates to armrest controls. The official description is: Aux 4th remote valve FLOW potentiometer is failed. In practical terms, the tractor has detected a problem with the flow control input for the 4th auxiliary remote valve. The…
What ARM 59 Means ARM 59 is a Case IH tractor fault code from the ARM controller, which relates to armrest controls. The official description is: Aux 4th remote valve LEVER potentiometer is failed. In practical terms, the tractor has detected a problem with the lever position signal for the 4th auxiliary remote valve. The…
What Case IH ARM 29 Means ARM 29 is a Case IH tractor fault code from the ARM controller, which relates to armrest controls. The official description is: Aux 1st remote valve LEVER potentiometer is failed. In practical terms, this fault indicates that the tractor has detected a problem with the potentiometer signal for the…
