What ARM 9041 Means ARM 9041 is a Case IH tractor fault code from the ARM controller, which relates to armrest controls. The official description is: Hitch DROP RATE potentiometer calibration value(s) are out of range. In practical terms, the tractor has detected that the calibrated signal for the hitch drop rate control is not…
What Case IH ARM 9031 Means Fault code ARM 9031 is a Case IH tractor fault from the ARM controller, which relates to armrest controls. The official description is: Hand throttle potentiometer calibration results not acceptable. In practical terms, the ARM controller has detected that the hand throttle potentiometer calibration did not produce an acceptable…
What Case IH ARM 9021 Means Fault code ARM 9021 applies to the ARM controller on a Case IH tractor. The category is Armrest Controls. The official description is: Hitch position command potentiometer calibration results not acceptable. In practical terms, this means the armrest controller has detected that the calibration result for the hitch position…
What ARM 9014 Means ARM 9014 is a Case IH tractor fault code from the ARM controller, which relates to armrest controls. The official description is: Controller Memory Error – Loss of MFD switch Configuration. In practical terms, the armrest controller has detected that stored configuration information for the MFD switch is missing, lost, or…
Fault code ARM 9013 on a Case IH tractor relates to the ARM controller, which is associated with armrest controls. The official description is: Controller Memory Error – Loss of Throttle Calibrations. In practical terms, this fault indicates that the ARM controller has detected a memory problem and may no longer have the stored throttle…
What Case IH ARM 9012 Means ARM 9012 is a Case IH tractor fault code for the ARM controller, which relates to armrest controls. The official description is: Controller Memory Error – Loss of Aux Remote Lever Calibrations. In practical terms, the armrest controller has detected a memory-related problem involving the stored calibrations for the…
Fault code ARM 9011 on a Case IH tractor relates to the ARM controller, which is associated with armrest controls. The official description is: Controller Memory Error – Loss of Hitch Position Command Calibration. In practical terms, this means the armrest controller has detected a memory-related issue involving the stored calibration for the hitch position…
What ARM 9015 Means ARM 9015 is a Case IH tractor fault code from the ARM controller, which is associated with armrest controls. The official description is: Controller Memory Error – Loss of Trans switches Configuration. In practical terms, this indicates that the armrest controller has detected a memory-related problem involving the stored configuration for…
What ARM 8011 Means ARM 8011 is a Case IH tractor fault code from the ARM controller, which is associated with armrest controls. The official description is: Battery Voltage is too Low. In practical terms, the armrest control system has detected that the electrical supply voltage available to the ARM controller is lower than expected….
What ARM 1149 Means On a Case IH tractor, fault code ARM 1149 is reported by the ARM controller, which relates to the tractor’s armrest controls. The official description is: Auto Field / Transport Switch is in an illogical state. In practical terms, the controller is seeing a switch status that does not make sense…
